Th🉐e conveying capacity of the liquid silica gel feeder is controlled by the electronic sꦍcale of the injection molding machine, with high precision, fast feeding speed and short time. The liquid silica gel feeder can be equipped with servo motor, which can save up to 60% power, depending on the production cycle of each mold. It can be quickly ejected and closed at low temperature, and there is no glue leakage in the feed pump body and pipeline.

Manufacturer of liquid silica gel feeder

The liquid silica gel feeder ado🍷p🐓ts servo hydraulic continuous synchronous metering system, which breaks the traditional hydraulic control mode and adopts the structure of servo motor gear pump. The synchronous structure adopts compensation design to ensure the durability of the equipment. Liquid silica gel feeder has the advantages of quiet, maintenance free, clean, oil-free and low energy consumption. The injection system is controlled by servo hydraulic station. The stability and repeatability of the injection system are greatly improved, making your injection parameters more accurate and debugging more convenient.

Liquid silica gel feeder adopts closed-loop control metering and conveying system. The flow rates of glue a and glue B are compared every 0.01 s🎃econds (i.e. PLC scan cycle). Then calculate the error between the two. The difference value isꦛ used for PID calculation. The hydraulic or pneumatic parameters can be adjusted by using the calculated results to fine tune the flow rate. This dynamic adjustment process makes the matching more accurate. This control method makes the matching accuracy of the feeding system less than 1%, which provides favorable conditions for ensuring the product quality.

Liquid silica gel feeder can adopt different injection parameters according to the requirements of different molds. The system can provide formula storage function and formula calling function. After using the new mould, the optimized parameters are saved as formulas. Next time, when the mould is used, the formula can be invoked from the controller's memory according to the mold number, so as to reduce unnecessar𒐪y waste and workload caused by debugging.

What is explained above is the characteristic function of liquid silica gel feeder. I hope it can help you after reading it. If you want to know more about the liquid silica gel feeder, please contact customer service online🧔 or call our service hotline (top right corner of the website) for consultation. We will wholeheartedly provide you with high-quality service!